Queensland Legislation

State Legislation
As of 1st July 2007, changes were applied to the Queensland Fire and Rescue Service Act 1990, stating that every smoke alarm in a Queensland rental property requires ongoing maintenance. Under this legislation, Landlords or agents must test and clean each smoke alarm within 30 days prior to each tenancy change or renewal. Not only this, but each smoke alarm and battery must be replaced before the expiry date. The legislation prohibits the transfer of these responsibilities to the tenant. 

New legislation as set out in the Building Fire Safety Regulation 2008, requires Queensland landlords to ensure a higher level of safety in their rental properties. These new requirements, which need to be in place by 1st January 2022 for rental properties, necessitate the following additional measures, over and above the standards set out in the Fire and Emergency Services Act 1990 and are as follows:

• Smoke alarms must be installed in every bedroom of a home
• All smoke alarms must be powered by either 240 volt or 10 year lithium battery
• All smoke alarms must be interconnected to each other
• All smoke alarms must be photoelectric rather than ionisation

(There is an ongoing responsibility to have smoke alarms tested and cleaned within 30 days prior to each tenancy change or renewal.)

If you are a landlord or home owner, find out what is involved to meet these stringent new standards, click the appropriate link at the bottom of this page.

Smoke alarm maintenance is governed by both State and Federal legislation and any person who does not comply with the relevant legislation is guilty of an offence.

Landlords who fail to take every practical step to ensure the safety of their tenants can face a multitude of unpleasant and unwanted consequences that, with the right guidance, can be easily avoided. As a Property Manager, Landlords entrust you with one of their greatest investments, which is a sizeable responsibility to shoulder. Here at Smoke Alarm Solutions, we aim to ease the burden in ensuring that your properties are compliant. Simply and efficiently.

Federal Legislation
Landlords must ensure that their rental property is properly fitted with the required number of working smoke alarms, complying with the Australian Standard (3786:2015), and that they are installed as outlined in the Building Code of Australia (BCA) part This legislation is applicable to all states of Australia.